Working with Stories
Stories and the 2D Plan View
The 2D Plan view displays the floor plan of the active story.
You can also display the external walls of the story above or below the active one. To do this, choose View > Show Story Above Current or View > Show Story Below Current from the menu.
Only one story can be active in the 2D Plan view at any time. You can activate one of the stories by choosing it in the Building Properties tab of the Inspector.
Using a Pop-Up Menu
There is a pop-up menu in the left bottom corner of the 2D Plan view. The upper section of the menu lists stories. You can choose one to display its floor plan in the 2D Plan view. The lower section of the menu lets you add or delete stories. The same commands are in the Building Properties tab of the Inspector.